Skip to main content
Skip table of contents

Instructions for importing address data

To upload the addresses to Onventis, proceed as follows:

  1. Download the Excel file Address_Import_Template.xlsx.

  2. Fill out the template according to the specifications.

  3. Go to Configuration → Onventis Connector → BcJob Management.

  4. Use the New button to create a new BcJob. Select the following settings:

    1. BizCon controller: Import controller

    2. BizCon Adapter: Address Import Adapter

    3. BizCon-Converter: MS Excel address import converter

    4. BizCon port: Web interface input port

  5. Create the BcJob with the Create button. The Cancel button takes you back to the overview.

  6. In the Title field, enter a title for the BcJob, e.g. “Address Import”.

  7. In the Import Data area, select the completed Excel file “Address_Import_Template”:

    1. Press the selection button

    2. Use the ... button to select the completed file.

    3. Attach the file to the BcJob using the Attach button.

    4. Go back to the BizCon job by clicking the Close button.

  8. If you want to upload the data to Onventis immediately, activate the BizCon job using the Activate and Close button. If you want to upload data at a later time, you can save the BcJob via the Disable and Close button and activate it later via the Activate and Close button.

  9. You will see a prompt, “Are you sure you want to activate the BcJob?” Confirm the question with the OK button.

  10. The BcJob has been saved and will be executed shortly. As soon as the BcJob has been executed and the file could be imported without errors, the BcJob changes to the OK status.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.